v212

V212 - 60Msps @0..1000samples with divider — last modified Jul 07, 2008 11:49 AM

 

VF48-V212-60-KO1.pof — last modified Jul 07, 2008 11:49 AM

Firmware V212 from J.P.M., 60 MHz, channel 0 on bottom

VF48-V212-40-KO1.pof — last modified Jul 07, 2008 11:49 AM

Firmware V212 from J.P.M., 40 MHz, channel 0 on bottom

VF48COL_Inv_V212-KO1.sof — last modified Jul 08, 2008 04:29 PM

 

VF48FE_Inv3X_V212_60MHz.sof — last modified Jul 07, 2008 11:49 AM

Front end with 60 MHz ADC sampling frequency

VF48FE_Inv3X_V212_40MHz.sof — last modified Jul 07, 2008 11:49 AM

Front end with 40 MHz ADC sampling frequency

VF48COL_Inv_V212-KO2.sof — last modified Jul 08, 2008 04:30 PM

V212 collector with V211 PLL configuration - fixes problem with V212 LVDS link on some VF48 modules.

VF48-V212-40-KO2.pof — last modified Jul 08, 2008 04:31 PM

Firmware V212 from J.P.M., 40 MHz, channel 0 on bottom, fixed PLL problem

VF48-V212-60-KO2.pof — last modified Jul 08, 2008 04:32 PM

Firmware V212 from J.P.M., 60 MHz, channel 0 on bottom, fixed PLL problem

VF48-V212-60-KO3.pof — last modified May 03, 2009 08:44 PM

Improvements to V212-KO2 firmware: - increased VME readout speed from 20 Mbytes/sec to about 40 Mbytes/sec (64bit DMA block transfers) - added "module busy" and "frontend busy" bits to CSR - fixed a large number of stability problems (reset failures, data timeouts, etc) - (temporarily - fixed in -KO4 firmware) disabled channel suppression of channels 0, 8, 16, 24, 32 and 40 to fix data corruption problem reported by TACTIC.

VF48COL_Inv_V212-KO3.sof — last modified May 03, 2009 08:47 PM

V212 collector - improvements vs -KO2: increased VME readout speed, improved stability.

VF48FE_Inv3X_V212_60MHz-KO3.sof — last modified May 03, 2009 08:50 PM

V212 frontend, 60 MHz. Changes vs V212-KO2: temporarily disabled channel suppression on channel 0 to avoid data corruption problem reported by TACTIC, disabled FE reset from spurious PLL resets, stability improvements.

VF48-V212-60-KO4.pof — last modified May 03, 2009 08:53 PM

Improvements to V212-KO3 firmware: reenabled channel suppression of channel 0 in each frontend (fix from Chris Pearson), fixed reset problem.

VF48FE_Inv3X_V212_60MHz-KO4.sof — last modified May 03, 2009 08:57 PM

V212 frontend, 60 MHz. Changes vs V212-KO3: reenable channel suppression of channel 0 (fix from Chris Pearson), fix reset problem.

VF48FE_Inv3X_V212_20MHz-KO4.sof — last modified Jul 29, 2009 02:02 PM

 

VF48FE_Inv3X_V212_40MHz-KO4.sof — last modified Jul 29, 2009 02:03 PM

 

VF48FE_Inv3X_V212_20MHz-KO4-ALPHA.sof — last modified Jul 29, 2009 02:04 PM

Same as -KO4, but no PLL reset and channel suppression modified to use formula "A[N]-A[N+4]" instead of "N+3" in standard firmware.

VF48-V212-40-KO4.pof — last modified Jul 29, 2009 02:05 PM

 

VF48-V212-20-KO4.pof — last modified Jul 29, 2009 02:06 PM

 

VF48-V212-20-KO4-ALPHA.pof — last modified Jul 29, 2009 02:44 PM

Special 20 MHz firmware for ALPHA. KO3 collector, KO4-20-ALPHA frontend (no PLL reset, N+4 channel suppression).