Sections

Personal tools

You are here: Home → Hardware → VME → VF48 → Firmware → v212 → VF48FE_Inv3X_V212_60MHz-KO3.sof

Members
Exp Spec Info
Hardware
- Camac
- VME
  - CAEN modules
  - Struck Modules
  - VF48
    - Firmware
      - v207
      - v211
      - v212b
      - v212
        
        VF48FE_Inv3X_V212_60MHz-KO3.sof
      - V213
      - V212 August 2009
      - October 2009
      - March 2010
      - April 2010
      - May 2010
      - Pienu-June-2010
      - Pienu-2011
    - Components
  - Triumf Related Modules
  - V680/B980
  - TIG10/TIGC
  - Iseg Modules
  - Mesytec Modules
  - PPG32
- VMIC/GE-FANUC VME SBC
- FastBus
- Peripherals
- PPC VME board
- PMC boards
- CCUSB interface
- alicetpc
- Communication devices
- MSCB system
- High Voltage
- terminals
- NIM
Software
Publications

VF48FE_Inv3X_V212_60MHz-KO3.sof

by Konstantin Olchanski — last modified May 03, 2009 08:50 PM

V212 frontend, 60 MHz. Changes vs V212-KO2: temporarily disabled channel suppression on channel 0 to avoid data corruption problem reported by TACTIC, disabled FE reset from spurious PLL resets, stability improvements.

VF48FE_Inv3X_V212_60MHz-KO3.sof — Octet Stream, 274Kb

Sections

Personal tools

VF48FE_Inv3X_V212_60MHz-KO3.sof

Document Actions