Sections

Personal tools

You are here: Home → Hardware → VME → VF48 → Firmware → v212 → VF48-V212-60-KO3.pof

Members
Exp Spec Info
Hardware
- Camac
- VME
  - CAEN modules
  - Struck Modules
  - VF48
    - Firmware
      - v207
      - v211
      - v212b
      - v212
        
        VF48-V212-60-KO3.pof
      - V213
      - V212 August 2009
      - October 2009
      - March 2010
      - April 2010
      - May 2010
      - Pienu-June-2010
      - Pienu-2011
    - Components
  - Triumf Related Modules
  - V680/B980
  - TIG10/TIGC
  - Iseg Modules
  - Mesytec Modules
  - PPG32
- VMIC/GE-FANUC VME SBC
- FastBus
- Peripherals
- PPC VME board
- PMC boards
- CCUSB interface
- alicetpc
- Communication devices
- MSCB system
- High Voltage
- terminals
- NIM
Software
Publications

VF48-V212-60-KO3.pof

by Konstantin Olchanski — last modified May 03, 2009 08:44 PM

Improvements to V212-KO2 firmware: - increased VME readout speed from 20 Mbytes/sec to about 40 Mbytes/sec (64bit DMA block transfers) - added "module busy" and "frontend busy" bits to CSR - fixed a large number of stability problems (reset failures, data timeouts, etc) - (temporarily - fixed in -KO4 firmware) disabled channel suppression of channels 0, 8, 16, 24, 32 and 40 to fix data corruption problem reported by TACTIC.

VF48-V212-60-KO3.pof — Octet Stream, 512Kb

Sections

Personal tools

VF48-V212-60-KO3.pof

Document Actions