Personal tools
You are here: Home → Exp Spec Info → musr → MVME_boot_162bug.html
 

MVME_boot_162bug.html

by admin — last modified Apr 13, 2006 06:24 PM

Boot board into 162-bug

Power off MVME162 board, remove jumper J22 9-10. 
    J22
  1 *** 2   Faces rear of board (VME connectors)
  3 *** 4
  5 *** 6
  7 *** 8
  9     10  out=EPROM (i.e. 162-bug)  in=FLASH (i.e. VxWorks)
 11 *** 12
 13 *** 14
 15 *** 16  Adjacent to front panel of board
(i.e. 4th jumper from front of board, 5th from rear). J22 is located close to bottom of board (see MVME162FX hardware manual, pages 2-11 & 2-5 for details).

Note - for CAMP boards, do not pull MVME162 board out. Instead unscrew breaker panel above (assuming the standard horizontally mounted crate) to access the jumper.

Power up the board again, and the prompt 

162-bug>
should appear on the consol.
Document Actions