MVME bootup params
Boot-up parameters of MVME cpu boards for Beta-NMR
Introduction
Each experiment (BNMR or BNQR) use two MVME cpu boards located in the VME crateBNMR |
BNQR |
||
PPC |
MVME162 |
PPC |
MVME162 |
bnmrhmvw (ip address 142.90.130.47) | bnmrvw (ip address 142.90.130.48) | vwisac2 (ip address 142.90.127.114) | polvw (ip address 142.90.127.139) |
-
Standard configurations for BetaNMR (bnmrhmvw and bnmrvw )
-
Standard configurations for BetaNQR (vwisac2 and polvw)
-
Other configurations:
==========================================================================
bnmrhmvw : (standard configuration)
==========================================================================boot device : dc
processor number : 2
host name : isdaq01.triumf.ca
file name : /vw-ppc/config/bnmrhmvw/vxWorks
inet on ethernet (e) : 142.90.127.47
inet on backplane (b):
host inet (h) : 142.90.127.42
gateway inet (g) :
user (u) : midas
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) : bnmrhmvw
startup script (s) : /vw-ppc/config/bnmrhmvw/bnmr.cmd
other (o) :
Back to top
bnmrvw : (standard configuration)
boot device : ei
processor number : 0
host name : isdaq01
file name :
inet on ethernet (e) : 142.90.127.48
inet on backplane (b):
host inet (h) : 142.90.127.42
gateway inet (g) :
user (u) : musrdaq
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) : bnmrvw
startup script (s) : /ram/stcamplx.bnm
other (o) :
Back to top
==========================================================================
vwisac2 : (standard configuration)
==========================================================================boot device : dc0
processor number : 0
host name : isdaq01.triumf.ca
file name : /vw-ppc/config/vwisac2/vxWorks
inet on ethernet (e) : 142.90.127.114
inet on backplane (b):
host inet (h) : 142.90.127.42
gateway inet (g) :
user (u) : midas
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) : vwisac2
startup script (s) : /vw-ppc/config/vwisac2/startup.cmd
other (o) :
NOTE: startup.cmd is a softlink set to bnqr.cmd or pol.cmd
Back to top
polvw : (standard configuration)
boot device : ei
processor number : 0
host name : isdaq01
file name :
inet on ethernet (e) : 142.90.127.139
inet on backplane (b):
host inet (h) : 142.90.127.42
gateway inet (g) :
user (u) : musrdaq
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) : polvw
startup script (s) : /ram/stcamplx.pol
other (o) :
Back to top
bnmrhmvw : booted from dasdevpc
boot device : dc
processor number : 2
host name : dasdevpc.triumf.ca
file name : /vw-ppc/config/bnmrhmvw/vxWorks
inet on ethernet (e) : 142.90.130.47
inet on backplane (b):
host inet (h) : 142.90.106.82
gateway inet (g) :
user (u) : midas
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) : bnmrhmvw
startup script (s) : /vw-ppc/config/bnmrhmvw/bnmr.cmd
other (o) :
Back to top
bnmrhmvw
:
booted from isdaq01 : suz (for testing)
boot device : dc
processor number : 2
host name : isdaq01.triumf.ca
file name : /vw-ppc/config/bnmrhmvw/vxWorks
inet on ethernet (e) : 142.90.127.47
inet on backplane (b):
host inet (h) : 142.90.127.42
gateway inet (g) :
user (u) : midas
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) : bnmrhmvw
startup script (s) : /vw-ppc/config/bnmrhmvw/suz.cmd
other (o) :
Back to top
devhmvw booted from dasdevpc to run bnmr front end:
boot device : dc
processor number : 2
host name : dasdevpc.triumf.ca
file name : /vw-ppc/config/devhmvw/vxWorks
inet on ethernet (e) : 142.90.106.102
inet on backplane (b):
host inet (h) : 142.90.106.82
gateway inet (g) :
user (u) : midas
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) : devhmvw
startup script (s) : /vw-ppc/config/devhmvw/bnmr.cmd
other (o) :
Back to top
devhmvw booted from dasdevpc to run as expt suz2 (cf bnmr2):
boot device : dc
processor number : 2
host name : dasdevpc.triumf.ca
file name : /vw-ppc/config/devhmvw/vxWorks
inet on ethernet (e) : 142.90.106.102
inet on backplane (b):
host inet (h) : 142.90.106.82
gateway inet (g) :
user (u) : midas
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) : devhmvw
startup script (s) : /vw-ppc/config/devhmvw/suz2.cmd
other (o) :
Back to top=================================================================